Product Overview

Mount the connection rings (boxes) on the formwork before casting the precast walls, spacing them according to the required shear‑load capacity. After demoulding, remove the anti‑fouling tape and open the steel‑wire‑rope loops with a hammer or crowbar. Position, brace, pour, and install the wall panels in accordance with the floor plan. Insert a vertical reinforcing bar between the joint collars of both walls, keeping the wire‑rope loops horizontal. Finally, erect the formwork, pour concrete into the joint, and wait for final set.

​

Standard steel‑wire‑rope loop lengths of 60 mm, 80 mm, 100 mm, 120 mm, and 140 mm suit joints in precast concrete wall panels 80 mm – 140 mm thick.